Greer & Kent

ADJUSTABLE UPRIGHT TENT POLES
The standard adjustable upright tent pole comes with a metal locking system, An 8mm-diameter x 75mm long plain spike in the top section and
a plastic cap on the bottom section. These tent poles are mainly used in the vertical position or on a slight angle, Adjustable tent poles can also
be produced with the following: - No spike but a plastic cap top and bottom, or a spike top and bottom the spike can plain or threaded, also the
base of the pole can have a plate fitted with a hole in it for fixing it down with a tent peg, a plate can also be fitted to the top of the pole.

The standard maximum heights of the poles are -
180cm 2Pce
198cm 2Pce
228cm 2Pce
244cm 2Pce
275cm 2Pce or 3Pce
305cm 2Pce or 3Pce
365cm 2Pce or 3Pce


MARQUEE POLES
Marquee poles come in 1Pce, 2Pce, 3Pce, or 4Pce.
The main diameters used are 38mm and 51mm.
The 51mm poles are usually 2Pce or 3Pce and are used for center poles. The 38mm poles are used for
side poles and are usually 1Pce or 2Pce, other 1Pce poles in diameters from 60mm up to 100mm can also be supplied. The spike is 9mm diameter x 150mm long or as required, a 125mm x 125mm x 5mm thick plate with two holes for fixing down is fitted to the 51mm diameter poles. The 38mm diameter poles are fitted with a 50mm x 50mm x 3mm thick plain plate. One or two "D" rings may all so be fitted to the pole for tying down. The heights of the poles vary from 180cm upwards.



Adjustable Upright Tent Poles

Adjustable upright tent poles are manufactured using a combination of four diameters of tube and come in a wall thickness of 0.9mm or 1.2mm,
tube diameters are: -
19mm - 16mm,
22.2mm - 19mm
25.4mm - 22.2mm.
Other pole sizes and combinations can be manufactured on request.



Marquee and Fixed Height Poles

FIXED HEIGHT TENT POLES
These poles have no adjustment on them they come in 1Pce, 2Pce, 3Pce, or 4Pce.
The spike in these poles can be 6.3mm diameter or 8mm diameter and be plain or threaded, the base
may have a cap or a plate on it. The diameter of the tube used for these poles is: -
16mm 19mm 22.2mm 25.4mm, and 28.5mm.
Heights of poles vary from 180cm up to 300cm.